SLAB LEVELER & SURFACE PLANER 1 1/4D X 12MM (15/32) CH X 1/2" SHK ROUTER BIT

Amana Tool® is an industry leader for over 40 years, commitment to offer the highest consistent quality and innovative products. Devotion to consistently providing the highest quality, and providing solutions for manufacturers, fabricators, display and cabinet professionals fabricators, display and cabinet professionals. We are...

Cut much deeper flutes than possible with a regular core box bit. Perfect for making flutes on CNC machines, #45934, diameter (D) 9/16, radius (r) 9/32, cutting Height (B) 1-1/4, Shank (D) 1/2, overall length (L) 2-7/8, flutes 2, Carbide Tipped core box 9/32...

Industrial brad point boring bits are coated with a non-stick coating for longer lasting cutting edge and tool life.Amana tool dowel drills are coated with a special polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there...

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution Yield a smooth surface, but feed rate is slightly reduced, #45419, diameter (D): 1/2, cutting height (B): 3/4, shank...

Cnc extender adapter made especially for 1/2" Shank router bits., #47641, (D) diameter 1, (D) shank 1/2, overall length (L) 3-5/8, max RPM 18, 000, L1 1-25/32, L2 1-9/16, L3 13/32, D1 1/2, 47641 1/2 inch Shank CNC extension adapter for 1/2 inch Shank...

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution Yield a smooth surface, but feed rate is slightly reduced, #45450, diameter (D): 1-1/4, cutting height (B): 1-1/4, Shank...

Application: use with solid carbide metric brad point boring drills. For Quick insertion and removal from chuck. (Can be used on left or right hand drills.) drills sold separately, #364032, (D) diameter: 3.2mm, (D) shank: 10mm, Overall Length (L): 38mm, 364032 drill adapter 10mm...

Application: use with solid carbide metric brad point boring drills. For Quick insertion and removal from chuck. (Can be used on left or right hand drills.) drills sold separately, #364040, (D) diameter: 4mm, (D) shank: 10mm, Overall Length (L): 38mm, 364040 drill adapter 10mm...

Using the same quality standards as our regular steel bearings, these ultra-glide bearing assemblies feature satin-smooth Delrina sleeves. Delrin is an industrial synthetic plastic material similar to nylon, and will leave no marks on the material being cut. Applications include solid-surface materials such as...

Using the same quality standards as our regular steel bearings, these ultra-glide bearing assemblies feature satin-smooth Delrin sleeves. Delrin is an industrial synthetic plastic material similar to nylon, and will leave no marks on the material being cut. Applications include solid-surface materials such as...

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced, #45433, diameter (D): 5/8, cutting Height (B): 2, shank...

Spiral-flute bits combine a shearing action in cutting with an auguring action in chip clearance. The shearing action yields an especially clean accurate cut while the auguring action clears chips from the cut. The ‘down-cut’ cuts from the surface down leaving a smooth edge...

Specially designed for speed and finish When working with solid hardwood. The combination of acute spiral flute Shear angles With face ground helix Yield High feed rates, fast plunge action, Quick direction changes, deep penetration and mirror finish. Recommended RPM 20, 000-21, 000, #46361,...

Two- and three-wing slotting Cutters are available individually. Use a two-wing Cutter for faster feed rates, three-wing cutters for better cut finish, #53200, diameter (D) 1-7/8, cutting height (B) 1/16, D1 5/16, # Wings 3, 53200 slotting cutter 3 Wing x 1-7/8 dia x...

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along...

Special unique carbide for longer lifetime in abrasive Material. Designed for CNC applications requiring high feed rates and a clean finish. Particularly suitable for double-sided melamine or laminated material, #46191, (D) diameter 1/2, (b) Cutting height 1-1/2, (D) shank 1/2, overall length (L) 4-1/16,...

To be used only on CNC machines and routers with automatic feeding. Produce super clean, smooth cuts especially in acrylic materials (Plexiglas Lucite) other plastics and wood. Bits are made according to strict tolerances from an exclusive carbide grade and polished to a mirror...

Must clamp work piece firmly to drill Press table, #55217, (B) Cutting height 1/2, (D) diameter 5/8, (D) shank 1/2, flutes 2, overall length (L) 2-1/2, D1 .335", 55217 carbide Tipped Plug Cutter for drill Press 5/8 dia x 1/2 x 1/2 inch Shank

Trim The edges of face frames flush with cabinet sides with this bit. At the same time, cut a decorative V-Groove to conceal the seam between the frame and the case., #47160, diameter (D) 5/8, cutting Height (B) 1, shank (D) 1/4, overall length...