Two- and three-wing slotting Cutters are available individually. Use a two-wing Cutter for faster feed rates, three-wing cutters for better cut finish, #53210, diameter (D) 1-7/8, cutting height (B) 1/4, D1 5/16, # Wings 3, 53210 slotting cutter 3 Wing x 1-7/8 dia x...

Spiral-flute bits combine a shearing action in cutting with an auguring action in chip clearance. The shearing action yields an especially clean accurate cut while the auguring action clears chips from the cut.The ‘Up-cut’ shears from the bottom up pulling chips from the bottom...

The quadraset is an adjustable slotting assembly that includes 1/8," 5/32," 3/16," & 1/4" Two-wing cutters, a 1/2" Shank Arbor with a pilot bearing, and a handful of spacers, washers and shims.#53600, diameter (D) 1-7/8, cutting Height (B) 1/8-23/32, shank (D) 1/2, overall length...

Spektra Extreme Tool Life Coated extra-fine carving and lettering router bits are engineered with a nACo nanocomposite coating, offering unparalleled durability and longevity. This micro-thin ceramic coating enhances the cutting edge's sharpness and lubricity, ensuring that every cut is clean, smooth, and precise. The...

Two- and three-wing slotting Cutters are available individually. Use a two-wing Cutter for faster feed rates, three-wing cutters for better cut finish, #53202, diameter (D) 1-7/8, cutting height (B) 5/64, D1 5/16, # Wings 3, 53202 slotting cutter 3 Wing x 1-7/8 dia x...

Two- and three-wing slotting Cutters are available individually. Use a two-wing Cutter for faster feed rates, three-wing cutters for better cut finish, #53204, diameter (D) 1-7/8, cutting height (B) 3/32, D1 5/16, # Wings 3, 53204 slotting cutter 3 Wing x 1-7/8 dia x...

Application: to retain bearings on tools Furnished with upper ball bearing guides. Collars include #67091 set screw., #47739, use w/ tool No. 45463, 45465, 45467, 45991., Face thickness .234 (15/64), outer diameter (OD) 23/32, inner diameter (id) 1/2, 47739 retaining collar 23/32 overall DIA...

Two- and three-wing slotting Cutters are available individually. Use a two-wing Cutter for faster feed rates, three-wing cutters for better cut finish. 5/32" Size also used for ‘biscuit-joint’ cutting, #53207, diameter (D) 1-7/8, cutting height (B) 5/32, D1 5/16, # Wings 3, 53207 slotting...

Two- and three-wing slotting Cutters are available individually. Use a two-wing Cutter for faster feed rates, three-wing cutters for better cut finish, #53209, diameter (D) 1-7/8, cutting Height (B) 7/32, D1 5/16, # Wings 3, 53209 slotting cutter 3 Wing x 1-7/8 dia x...

Amana Tool uses only the finest industrial quality precision ball bearings available. Bearings are double steel-shielded for extra rigidity and to inhibit dust. A special high-performance, high-temperature grease is used for maximum life., #47714, diameter (D) 3/4, cutting height (B) .280 (9/32), shank (D)...

Amana Tool uses only the finest industrial quality precision ball bearings available. Bearings are double steel-shielded for extra rigidity and to inhibit dust. A special high-performance, high-temperature grease is used for maximum life., #47702, diameter (D) 3/8, application 3/8" Diameter flush trim, B .124...

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution Yield a smooth surface, but feed rate is slightly reduced, #45211, diameter (D): 1/4, cutting height (B): 1, shank...

Amana Tool - 47124 Carbide Tipped Flush Trim 1/2 Dia x 1-1/2 x 1/2" Shank

The Solid Carbide Through Hole Dowel Drill Bit is designed to drill and bore clean holes through hard and soft woods. This 3 mm boring bit for doweling allows you to create dowel joints with your handheld drill. Use the wood dowel drill bits...

Groove edges for Molding, splines or biscuits, and other purposes. Rout tongue-and-groove joinery. Slotting Cutters are available with either 2-wing or 3-wing cutters. Each assembly includes a cutter, bearing for a 1/2" Deep cut, and either a 1/4"-, 3/8"-, or 1/2"-shank Arbor. Use in...

Amana Tool - 47126 Carbide Tipped Flush Trim 1/2 Dia x 2" x 1/2 Shank with Double Ball

Application: drill pocket-holes, flat-bottom holes, etc., using any 3/8" Or larger portable drill or stationary drill press. Forstner pattern bits are well known for their ability to drill clean and chip-free holes in wood. Amana Tool uses only the finest quality tool steel, precision...

Industrial brad point boring bits are coated with a non-stick coating for longer lasting cutting edge and tool life.Amana tool dowel drills are coated with a special polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there...

Application: use with solid carbide metric brad point boring drills. For Quick insertion and removal from chuck. (Can be used on left or right hand drills.) drills sold separately, #364035, (D) diameter: 3.5mm, (D) shank: 10mm, Overall Length (L): 38mm, 364035 drill adapter 10mm...

This is a heavy-duty production blade for general trimming and crosscutting of hardwood and softwood. It has an extra-thick plate and cuts a wide kerf. The hook angle is aggressive at 10°. all blades feature the alternate top bevel grind for clean cuts, #716960,...